top of page
Smartic Corporation
Search

Industrial IoT Sensors: How Many Do You Need and Where Should You Install Them First?

Jun 25
4 min read

The Wrong Question: “How Many Sensors Do I Need?”


When a supplier offers you “500 sensors to instrument your entire plant,” you get an impressive quote for a project that is likely to stall. The right question isn't how many sensors you need, but which assets to prioritize, which variables to measure, and which thresholds to establish.


McKinsey makes this clear in its predictive maintenance analysis: “one of the most common obstacles to scaling PdM programs is the difficulty of prioritizing which assets to include.” In other words, the problem isn't the technology—it's prioritization.


Start with an Asset Criticality Matrix


The way to prioritize assets for sensor deployment is to use an Impact × Failure Frequency matrix:

Impact

Low frequency

Medium frequency

High frequency

High impact (on the production line)

Instrument

Instrument first

Instrument first

Medium impact

Manual monitoring

Instrument

Instrument

Low impact

Visual inspection

Visual inspection

Manual monitoring

Assets in the “high impact, medium-to-high failure frequency” quadrant should be your first batch. These typically include main compressors, packaging lines, chillers, critical pump motors, transformers, and bottleneck equipment.


In a plant with 100–500 employees, this initial batch usually consists of 10 to 25 pieces of equipment, not 500.


Sensor Types and the Problems Each One Solves

Sensor

Variable

Failure predicted

Asset type

Vibration (accelerometer)

3-axis acceleration

Imbalance, bearing faults, looseness, misalignment

Motors, pumps, fans, compressors

Temperature (RTD/IR)

Housing or surface temperature (°C)

Overloading, friction, lubrication failure

Bearings, motors, electrical panels, transformers

Current / power consumption

Amps, kW, power factor

Overloading, motor degradation

Electric motors, critical production lines

Ultrasound

Acoustic level (dB)

Leaks, electrical discharges

Compressed air, steam, valves, electrical panels

Pressure

bar / PSI

Leaks, blockages, overpressure

Hydraulic and pneumatic systems, steam systems

Flow

L/min, m³/h

Blockages, inadequate pumping

Fluid lines, cooling systems

Power quality

THD, harmonics

Equipment damage, energy losses

Main power supplies, electrical panels

The 80/20 rule: vibration + temperature + current cover approximately 80% of predictive maintenance use cases in industrial plants.

Would you like us to design your asset criticality matrix? In a free one-hour session with your maintenance team, we'll map your critical assets and recommend your first batch of sensors. Schedule a session.


How Many Sensors per Asset?


Here is what is typically installed on each type of equipment:


  • Critical electric motor: 2–4 measurement points (vibration at each bearing, housing temperature, and current).

  • Centrifugal pump: 3–6 measurement points (pump and motor vibration, temperature, and inlet/outlet pressure).

  • Compressor: 4–8 measurement points (vibration, oil temperature, discharge pressure, airflow, and power consumption).

  • Packaging line: 5–15 measurement points distributed across gearmotors, seals, counters, and optical sensors.

  • Chiller: 4–6 measurement points (inlet/outlet temperature, refrigerant pressure, power consumption, and compressor vibration).


For an average plant starting with 15 assets, you're looking at 60 to 120 sensors, not 500.


How Much Does It Cost, and When Does It Pay for Itself?


Connected industrial sensors, whether wireless or wired, typically range from USD 80 to USD 600 per measurement point, depending on the protocol (LoRaWAN, NB-IoT, industrial Wi-Fi, Ethernet) and certifications (ATEX, IP67, etc.). Gateway and platform costs are quoted separately.


An initial deployment covering 60 measurement points across 15 critical assets typically costs between USD 8,000 and USD 25,000 in hardware, plus the monthly SaaS platform fee.


The typical payback period, according to Deloitte and McKinsey, is 12 to 18 months in plants with significant annual downtime. If your plant loses USD 25,000 per hour of downtime and sensor deployment helps prevent 30 hours of downtime per year, that represents USD 750,000 in annual savings, compared with an initial investment of USD 20,000.


Want a quote tailored to your plant? We'll prepare a no-obligation proposal based on your recommended initial deployment. Request a quote.


Common Mistakes in a First Sensor Deployment


  1. Buying the cheapest sensor without the appropriate certifications for the operating environment (humidity, dust, vibration, or explosive atmospheres).

  2. Overlooking connectivity: a wireless sensor in a basement with concrete walls may need a repeater.

  3. Failing to coordinate with IT/OT from day one: this can lead to conflicts over network security and firewalls.

  4. Failing to calibrate thresholds against historical data: this can generate false alarms that operators eventually ignore.

  5. Instrumenting what is easiest to access instead of what is most critical: simply because the equipment is accessible, not because it is important to production.


Wireless vs. Wired Sensors


Wireless (LoRaWAN, NB-IoT, industrial BLE): Installation takes hours, production shutdowns are generally unnecessary, and battery life can reach 3–5 years. Ideal for retrofitting existing assets.


Wired (4–20 mA, Modbus, EtherNet/IP): Greater reliability and sampling frequency, making these sensors better suited to new equipment or production lines with scheduled installation shutdowns.


In practice, most plants undergoing digital transformation start with wireless sensors for faster deployment and later transition critical assets to wired solutions.


Conclusion


Effective sensor deployment isn't about buying more sensors; it's about prioritizing the right ones. A plant that starts by instrumenting 15 critical assets, implementing functional dashboards, and documenting a successful use case within 90 days will make faster progress than a plant that buys 500 sensors and gets stuck during implementation.

Want to see a real sensor deployment in action before investing? In a 30-minute demo, we'll show you a real-world case comparable to your industry. Schedule a demo.


References and Sources

Article prepared for Smartic — Industry 4.0, industrial IoT, and predictive maintenance. Want to see Smartic in action at your plant? Schedule a 30-minute demo.


 
 
 

Comments


© 2022 by Smartic Corporation

bottom of page